becker



Puracell

Puracell II

Glasfloss Puracell II mini-pleat filters are ideal for applications requiring high efficiency in a 4' depth. Available in MERV 11, 13 & 14 performance.

The Glasfloss Puracell II filter is a mini-pleat cartridge encapsulated between two heavy-duty beverage board die-cut frames. The die-cut frames are bonded together, creating a double-wall thickness around the perimeter of the filter. The Puracell II pack is pleated wet-laid micro fiber media. The pleats are separated and supported by a uniform glue bead that produces a low initial pressure drop while maximizing the filtration area. The media pack is resistant to moisture and does not support the growth of bacteria and mold. The media pack is thoroughly bonded to the interior of the die-cut frame. The filter shall be rated to withstand temperatures up to 180 degrees Fahrenheit. The recommended final resistance for Puracell II filters is 1.5″ w.g.

Ficha Técnica
Puracell II M & MH

Glasfloss Puracell II M & MH mini-pleat filters are designed for high efficiency applications and incorporate a heavy-duty metal frame. Available in MERV 11, 13 & 14 performance.

The Glasfloss Puracell II M & MH filter is a minipleat cartridge encapsulated with a heavy-duty 26 gauge galvanized metal frame. An optional gasket can be applied to the filter frame. The galvanized metal frame is riveted together to form a rigid frame. The Puracell II M & MH pack is pleated, wet-laid micro fiber media. The pleats are separated and supported by a uniform glue bead that produces a low initial pressure drop while maximizing the filtration area. The media pack is resistant to moisture and does not support the growth of bacteria and mold. The media pack is thoroughly sealed to the inside of the metal frame to prevent air bypass. A metal face guard shall be secured on the air leaving side. The filter shall be rated to withstand temperatures up to 180 degrees Fahrenheit. The recommended final resistance for Puracell II M & MH filters is 1.5″ w.g.

Ficha Técnica
Puracell V & VX

Glasfloss Puracell V & VX mini-pleat filters offer high efficiency and low initial pressure drop for extended service life. Produced in 12" depth metal box or header frame design. Available in MERV 11, 13, 14, 15, 16 & 99.97% performance.

The Puracell V & VX shall utilize multiple mini-pleat media packs which allow low resistance to air flow and long service life. The media shall be water resistant, inorganic, wet laid glass microfiber. The Puracell V & VX media packs are constructed by pleating a continuous sheet of media. The pleats are separated by a uniform glue bead that produces low pressure drop while maximizing the filtration area. The media packs are resistant to moisture and do not support the growth of bacteria and mold. The media packs are completely sealed and bonded within the heavy-duty 26-gauge galvanized steel frame. An optional peripheral header design is available. The air entering side of the Puracell V & VX filter frame shall incorporate four holes to insert spring clips from a holding frame device. The filters shall be rated to withstand temperatures up to 180 degrees Fahrenheit. Recommended final resistance for Puracell V is 2.0", and for VX filters is 1.5″ w.g.

Ficha Técnica
Puracell VP & VPX

Glasfloss Puracell VP & VPX mini-pleat filters deliver high particulate removal efficiency and low pressure drop for extended service life. Produced in 12" depth heavy-duty injection molded plastic header frame design. Available in MERV 11, 13, 14, 15 16 & 99.97% performance.

The Puracell VP and VPX Series utilize multiple mini-pleat packs which allow low resistance to air flow and long service life. The media shall be water resistant, inorganic, wet laid glass microfiber which does not support the growth of bacteria or mold. The Puracell VP and VPX media packs are constructed by pleating a continuous sheet of media. The pleats are separated by a uniform glue bead that produces low pressure drop while maximizing the filtration area. The media packs are completely sealed and bonded within the heavyduty injection molded plastic frame. The filters shall be rated to withstand temperatures up to 180 degrees Fahrenheit.

Ficha Técnica