becker



Filtro Rígido

Manga 600, 800 & 900

Glasfloss Magna 600, 800 & 900 Series are designed for commercial and industrial applications requiring high efficiency and long service life. Produced in 6" or 12" depth metal or particle board frame designs. Available in MERV 11, 13 & 14 performance.

The frame shall be made of a rigid high-density 3/4″ particleboard or 26-gauge galvanized metal. The metal frame shall have two support struts on the air-entry and air-exit sides. A 26-gauge galvanized steel header is available on the metal frame. The media shall be constructed of a water-resistant inorganic glass microfiber. For quality assurance, the glass microfiber media rolls are randomly tested and certified to meet minimum efficiency requirements by the media manufacturer. The media pack shall consist of a continuous sheet of the pleated glass microfiber. The pleated media pack is separated with multiple rolled-edge corrugated aluminum separators. The media cartridge shall be sealed with a fire retarding, rubber base, two-part sealant that bonds the media and separators to the interior of the particleboard frame filter. The media pack shall be pressure-fitted with a fiberglass media gasket on metal frame filters. A 1/4″ thick gasket shall be applied on the filter as an option. The filter shall be rated to withstand temperatures up to 180 degrees Fahrenheit. The particleboard filters and metal frame filters shall be U.L. Classified.

Ficha Técnica
Magna 950, 1000 & 1100

Glasfloss Magna 950, 1000 & 1100 Series are designed for high efficiency commercial and industrial applications. Produced in 6" or 12"depth metal or particle frame designs. Available MERV 16, 99.97% and 99.99% performance.

The frame shall be made of a rigid high-density 3/4" particleboard or 18-gauge galvanized metal, (26-gauge galvanized metal frame is used for the Magna 950 Series – 95%). A 26-gauge galvanized steel header is available on the metal frame on 950 Series. The media shall be constructed of a water-resistant, inorganic glass microfiber. For quality assurance, the glass microfiber media rolls are randomly tested and certified to meet minimum efficiency requirements by the media manufacturer. The media pack shall consist of a continuous sheet of the pleated glass microfiber. The pleated media pack is separated with multiple rolled-edge corrugated aluminum separators. The media cartridge shall be sealed with a fire retarding, rubber base, two-part sealant that bonds the media and separators to the interior of the frame. A 1/4" thick closed cell neoprene gasket shall be applied on the filter. The filter shall be rated to withstand temperatures at a continuous 180o Fahrenheit. The 95%, 99.97% and 99.99% Magna filters shall be U.L. Classified.

Ficha Técnica
Magna GT (Gas Turbine Series)

Glasfloss Magna GT are designed for gas turbine engines, centrifugal compressor and other high velocity applications. Produced in 6" or 12" depths metal frame in single or double header designs. Available in MERV 11 & 14 performance.

The Glasfloss Magna GT frame shall be made of a 26 gauge galvanized metal. A 26 gauge galvanized steel header shall be used on the metal frame. The media shall be constructed of a water resistant, inorganic glass microfiber. For quality assurance, the glass microfiber media rolls are randomly tested and certified to meet minimum efficiency requirements by the media manufacturer. The media pack shall consist of a continuous sheet of the pleated glass microfiber. The pleated media pack is separated with multiple rolled edge corrugated aluminum separators. The media cartridge shall be sealed at the air entering, center and air leaving sides with a sealant that bonds the media and separators to the interior of the frame filter. A 1/4″ neoprene thick gasket shall be applied on the filter. An expanded metal face guard is installed on the air entering and air leaving sides of the frame to insure filter integrity and increase rigidity. The expanded metal shall be galvanized to resist rust and corrosion. The filter shall be rated to withstand temperatures up to 180 degrees Fahrenheit. The filters shall be rated U.L. Classified and withstand up to 11 in. w.g. in an "Air Filter Breaching Test."

Ficha Técnica